{"id":1111,"date":"2011-03-16T09:27:59","date_gmt":"2011-03-16T17:27:59","guid":{"rendered":"http:\/\/www.rightonreplicas.com\/blog\/?page_id=1111"},"modified":"2011-03-17T03:56:44","modified_gmt":"2011-03-17T11:56:44","slug":"48-ford-woody-monogram-85-4282","status":"publish","type":"page","link":"http:\/\/www.rightonreplicas.com\/blog\/?page_id=1111","title":{"rendered":"48 Ford Woody Monogram 85-4282"},"content":{"rendered":"
\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\"Twitt\"\n\t\t\t\t\t\t<\/a>\n\t\t\t\t\t<\/div>

RoR Review 20110317 \u00e2\u20ac\u201c 1948 Ford Woody Monogram 85-4282<\/p>\n

\"a000\"<\/a>
\nBuy This Kit<\/span><\/a> (Midget Racer and Trailer not included)<\/p>\n

Review and Photos by \"Tony<\/a>Tony Gibson (w\/Al Rogers)<\/p>\n

\u00ef\u00bb\u00bf
\n\"a1\"<\/a>
\n#1 Monogram 1948 Ford Woody.\u00c2\u00a0 There are 127 pieces molded in white, chrome and clear.\u00c2\u00a0 An easy to follow direction sheet for this 1\/25 scale level 2 kit is included.<\/p>\n

\"a2\"<\/a>
\n#2 Give the parts a quick look to see if anything needs cleaning up before painting.\u00c2\u00a0 There was very little flashing.\u00c2\u00a0 Two small die marks were seen on the top of the fenders, but these were easily sanded with 600 grit sandpaper.\u00c2\u00a0 The body for this model seemed very oily, possibly from the molding release agent.\u00c2\u00a0 Everything was given a good wash with mild dish soap and warm water.\u00c2\u00a0 The body parts were washed twice.\u00c2\u00a0 Allow these to dry completely before painting. The body parts were given a coat of white Duplicolor\u00e2\u201e\u00a2 sealer and allowed to dry in a warm area for about an hour.\u00c2\u00a0 The surfaces were wiped down with a piece of t-shirt fabric.\u00c2\u00a0 Two light coats of Duplicolor\u00e2\u201e\u00a2 gold metallic, 30 minutes dry time between coats.\u00c2\u00a0 This will bring out a brighter color in the final top coat. Finally, two even coats of Duplicolor\u00e2\u201e\u00a2 Red Bordeaux were applied, 30 minutes of dry time between coats.\u00c2\u00a0 In the areas of \u00e2\u20ac\u0153wood grain\u00e2\u20ac\u009d the paint was applied a little lighter than the rest.\u00c2\u00a0 Also, the top of the model was not painted heavily since another color would be applied later. No clear coat was applied at this time.<\/p>\n

\"a3\"<\/a>
\n#3 The paint dried at least 24 hours in a warm area.\u00c2\u00a0 The areas of \u00e2\u20ac\u0153wood grain\u00e2\u20ac\u009d were then taped off with 3M\u00e2\u201e\u00a2 blue painters tape.\u00c2\u00a0 This brand seems to leave the least amount of tape residue. (Builders note: The wood grain areas of this model were painted by Al Rogers from Flint Area Auto Modelers.\u00c2\u00a0 Special thanks to him for showing me this technique.\u00c2\u00a0 This part may look complicated, but after walking through it with Al I found it was easier than I thought)<\/p>\n

\"a4\"<\/a>
\n#4 The taped off areas and all inner panels were painted with craft paint; the color here is Roman Stucco by Delta.\u00c2\u00a0<\/p>\n

\"a5\"<\/a>
\n#5 Two coats were applied using a soft, \u00c2\u00bc inch brush. 30-40 minutes were allowed between coats for drying.\u00c2\u00a0 Use light, soft strokes and go in the same direction.\u00c2\u00a0 Don\u00e2\u20ac\u2122t worry too much about brush strokes in the paint; these will be your friend later on.<\/p>\n

\"a6\"<\/a>
\n#6 After the last coat of brown was applied it was allowed to dry for about an hour.\u00c2\u00a0<\/p>\n

\"a7\"<\/a> \"a9\"<\/a>
\n#7, 9 A Minwax\u00e2\u201e\u00a2 stain touch up pen was used; the color here was Golden Oak.\u00c2\u00a0 Apply to one piece or section at a time or it will get gummy before the next step can be completed.<\/p>\n

\"a8\"<\/a>
\n#8 With paper towel, wipe off the excess stain very gently.\u00c2\u00a0 Do not blot, wipe in one direction only.\u00c2\u00a0 Do not use much pressure at all.\u00c2\u00a0 At this time you\u00e2\u20ac\u2122ll start seeing the texture of the wood grain and brush strokes start to pop out.\u00c2\u00a0 Even small dirt nubs or imperfections in the craft paint will start to look like knot holes.<\/p>\n

\"a10\"<\/a>
\n#10 On the exterior, the raised areas of the panel were given the same treatment as the interior parts.<\/p>\n

\"a11\"<\/a>
\n#11 Decals are offered for the darker insert panels but instead it was decided to use stain on these also.\u00c2\u00a0 Minwax\u00e2\u201e\u00a2 Dark Walnut touch up stain was used for the darker areas.\u00c2\u00a0 The pen was pressed to the area so a small puddle of stain was left.\u00c2\u00a0 Then a small brush was used to spread the stain around.\u00c2\u00a0 This color was not wiped off, just allowed to dry completely. Be very careful not to get this darker color on the lighter raised areas.\u00c2\u00a0 If you do, you will have to touch up these areas with the craft paint then retouch them with the lighter color stain.<\/p>\n

\"a12\"<\/a>
\n#12 This process took about 4 hours to complete.\u00c2\u00a0 The stain was allowed to dry for 2 days before clear coat was applied.<\/p>\n

\"a13\"<\/a>
\n#13 The wood grain areas were given a \u00e2\u20ac\u0153dusting\u00e2\u20ac\u009d coat of Duplicolor\u00e2\u201e\u00a2 Crystal Clear and allowed to dry for about 30 minutes.\u00c2\u00a0 Then the entire body was given two light even coats of the same clear. (There is no picture of this taken before the roof was painted black\u00e2\u20ac\u00a6sorry).<\/p>\n

\"a14\"<\/a>
\n#14 The roof was painted with American Ivory Black craft paint.\u00c2\u00a0 A soft, \u00c2\u00bc inch brush was used.\u00c2\u00a0 one coat was given using long, even strokes front to back.\u00c2\u00a0 After drying for 30 minutes, a second coat was applied, brushing side to side.\u00c2\u00a0 This made the roof look like canvas.\u00c2\u00a0 After being skeptical at first, it was found that this technique really does work.<\/p>\n

\"a15\"<\/a>
\n#15 The seats were given two coats of craft paint in a medium camel color.\u00c2\u00a0 Allow 20-30 minutes of dry time between coats.\u00c2\u00a0 Use the same soft, \u00c2\u00bc inch brush.\u00c2\u00a0 The effect looks like a heavy cloth.<\/p>\n

\"a16\"<\/a>
\n#16 The engine assembly went according to the directions without problems.\u00c2\u00a0 All parts were test fit and mocked up before gluing.<\/p>\n

\"a17\"<\/a>
\n#17 The undercarriage parts were painted with rattle can flat black and semi gloss black.\u00c2\u00a0 A little silver paint was thinned with lacquer thinner.\u00c2\u00a0 After dipping the brush in paint, wipe it gently on a paper towel to remove most of the paint then lightly brush over the underside of the floor pan.\u00c2\u00a0 This will give it a little more character.\u00c2\u00a0 The chassis was assembled without issue.\u00c2\u00a0 Study the directions carefully; the order that parts are assembled is important.<\/p>\n

\"a18\"<\/a>
\n#18 The interior was assembled without any issues.\u00c2\u00a0 The steering wheel and dash were painted the same color as the exterior.\u00c2\u00a0 The door handles and window cranks were painted silver.<\/p>\n

\"a19\"<\/a>
\n#19 The clear plastic from the kit was not used for this model.\u00c2\u00a0 It seemed too thick and heavy.\u00c2\u00a0 Instead, some thin, clear plastic sheet was cut to size and glued in.<\/p>\n

\"a20\"<\/a>
\n#20 In the pictures the glass pieces look scratched or fogged.\u00c2\u00a0 Fast drying glue was used to set them into place.\u00c2\u00a0 The vapors from this glue caused this.\u00c2\u00a0 These defects were polished out later with a fine polish and a q-tip.\u00c2\u00a0 Unfortunately, when the body was set into place, it happened again on the inside due to the same glue.\u00c2\u00a0 It would have been much better to use either windshield glue or regular old Testors.\u00c2\u00a0 A big lesson was learned! Final assembly went according to plan (except for the window fogging problem). Bare metal foil was used on the feature lines on the fenders and hood. The rear tires from the kit were not used on this build.\u00c2\u00a0 Tires from another kit were used because they were a little wider.\u00c2\u00a0 Because this car was to be displayed pulling a trailer, the wider tires seemed appropriate.<\/p>\n

\"a21\"<\/a>
\n#21 I really enjoyed this kit.\u00c2\u00a0 It was quite a departure from my usual builds and a nice change.\u00c2\u00a0 Other than the model having some twists and bends to the chassis, it was a fairly clean kit.\u00c2\u00a0 I was disappointed that there was no white wall tire option.\u00c2\u00a0 Painting was the toughest part of the whole thing, but the challenge made it enjoyable.\u00c2\u00a0 The level 2 rating was probably accurate, but it might be a little tough for a first time builder.\u00c2\u00a0 The directions are good but can be confusing if the builder hasn\u00e2\u20ac\u2122t studied them a little.<\/p>\n

\"a22\"<\/a>
\n#22 The trailer and car displayed with the Woody are from the Revell Curtis Midget Racer.\u00c2\u00a0 The trailer hitch assembly was from the Midget kit, it was not offered in the Woody kit but a hitch can easily be made from scratch.<\/p>\n

\"a23\"<\/a>
\n#23<\/p>\n

Have Fun!<\/p>\n

Keep the glue off the windshield!<\/p>\n

Tony Gibson<\/p>\n