Right On! Replicas

RoR SnapShot Project Review 20120208* – Pause for a Cause

A SnapShot Project by Doug Cole

Most of the time in our quirky little hobby we build models. Sometimes we help other people do that too. Whether it’s just advice for others, participating in a Make-N-Take for kids or even running a website like Right On! Replicas. That’s what modeling is all about!  But once in a while something comes along that has a deeper meaning. When Danielle Enos of Stevens Worldwide Van Lines called for help, I jumped at the chance to do something with our hobby that had a bigger impact on people’s lives.

The generosity and compassion of the Stevens Company was shown when they chose to order a custom tractor-trailer to promote breast cancer awareness in the traditional bright pink color. That effort was coordinated with the National Breast Cancer Foundation, Inc., and featured a brand new rig for the promotion. It happened that they needed a model of the proposed unit for publicity and presentations at various functions. When I found out I had barely a week to pull it off – I had to get going fast. I got the blank white units they supplied and some custom pink paint from an auto parts store I quickly disassembled the units and  primed them with DupliColor Primer. I then airbrushed the color coats and after a day I gave them a few clear coats. Steven’s sent them out to the graphics department for the custom decals and emblems.

In a proud moment I was able to present them with the completed model ahead of schedule. I say proud because I was happy to help out in any way I could but if you know someone that was afflicted with the terrible scourge of breast cancer (and you probably do) you know the awful tragedy that it is. I was more proud of the Steven’s Company for showing their commitment to help by making the investment in Breast Cancer Awareness in such a visible way. I’m shown here presenting the unit to Joe Biskner, Steven’s President. I would like to challenge all modelers to look for chances to help these greater issues and “Pause for a Cause.”

 

*All Registered trademarks are the property of their respective brands.

RoR Step-by-Step Review 20120205* – 1969 Chevy Camaro SS/RS Revell 85-4929 Review
Click Here to Buy This Kit

See the Step-by-Step Review by Marty and Stephanie Oberman

I originally built this kit when it was initially issued as the “Pace Car” kit, and have fond recollections doing so. I built and painted it in the same color scheme as my best friend’s ’67 ragtop which he bought and restored to health back in the 70s. There were many memories in that car, and unfortunately I was forced to sell my ’69 model due to financial difficulties some years ago. Needless to say I was excited to have the opportunity to replicate this ’69 in the same color scheme.

For the Modeler: Aside from a decal issue with the hood stripes prevented me from “replicating” my buddy’s ’67 convertible, and fit issue with the exhaust header/pipes, I found no major fit or finish problems with this kit. Although it’s not the “perfect build” per se, it comes VERY close, and I enjoyed building it very much. Therefore, I give this kit an easy…and I mean EASY 4 1/2 stars. I highly recommend this kit to intermediate (like me) and advanced modelers looking for a trouble-free building experience of a classic subject. Would I build this kit again? In a “heartbeat of America” I would! ;c)

Donations Humbly Accepted
*All Registered trademarks are the property of their respective brands.

RoR SnapShot Review 20120202* – 2009 Dodge Challenger SRT8 #85-4220 1/25  Revell Review
Click Here to Buy This Kit

 Review and Photos by Jessica Green   

Inspired by the models reviewed at Right On Replicas, I decided to attempt my very first model kit.  I chose a model I thought was interesting and had nice styling.  The Revell 2009 Dodge Challenger SRT8 is considered a Level 2 1:25 scale model and although this was my first model kit ever, I would agree with that level.  It presented challenges for a beginning modeler such as painting, gluing and a lot of time and patience, without requiring parts casting or advanced techniques.

I bought four Testors paints and basic tools to get started such as a plastic drop mat, a Testors starter kit and some sandpaper.  I got to work painting and assembling the engine parts and quickly became a little overwhelmed by how many tiny pieces were on the table in front of me.  Some of the work proved very challenging, such as placing the decal on the tiny oil valve cover.  I found tweezers to be a very useful tool throughout the project for details like that.

 I chose a metallic ruby red spray paint for the body.  A tip I have for the beginning modeler is to make sure you have all the parts that require body paint together at once before starting to paint.  I forgot about the side mirrors and had cleaned up the paint area before I realized I had more parts to paint!  The only part of this model that turned out to be too difficult was getting the wheels to line up properly.  I still don’t think I installed them properly, but as long as you don’t move the model they won’t fall off completely.

 Overall, I enjoyed putting this challenging Challenger together.  The entire project took me seven days from start to finish.  It’s a good kit for a beginner trying their first Level 2 model build.

Jessica

Donations Humbly Accepted
*All Registered trademarks are the property of their respective brands.