Right On! Replicas

RoR Step-by-Step Review 20110701*
‘68 Dodge Dart Hemi 1:25 Scale Revell Kit #85-4217
Click here to buy this kit through Amazon.com

Click the Buy Now link below to purchase the Step-by-Step review by Pat Ackerson

It’s hard to believe that you could buy a near “strip-ready” car from the factory but there were some buyers that didn’t care that there was no warranty – they just wanted one that was “HOT” and the ’68 Dodge Dart Hemi was it! These new Darts were termed “senior compacts” by Dodge and were extremely popular. In addition to the Dart being extremely popular, drag racing was too. So, in the mid-60’s Dodge started offering ultra high performance versions of the Dart intended for competitive use in the NHRA. These cars were radically “tweaked” with performance parts and eventually in 1968, Dodge contracted Hurst Performance to build a limited number of 426 Hemi-powered Darts to compete in the NHRA’s SS/B class. This was done by shipping the Dart body shell to Hurst Performance who would then modify the engine compartment using a sledge hammer in order to fit the magnesium cross ram-inducted 426 Hemi. Hurst would then modify the front shock towers and the rear wheel well arches to fit larger rear drag racing slicks. Other modifications included 7 X 14” steel wheels, a fiberglass nose, fenders and hood, lightened bumpers, no side view mirrors, no radio or heater, no soundproofing in the floor or firewall, no back seat, and a trunk mounted battery among a host of other modifications to lessen weight. When completed these bad boys were delivered to the customer without any type of manufacture warranty and a disclaimer; “intended for use in supervised acceleration trials and not intended for general highway use” (Insert a Tim Taylor man-growl here). Ultimately the ’68 Hemi powered Dart would successfully cover the quarter mile with elapsed times in the ten second range.

For the Modeler: This is one of the Revell “Special Edition” Series kits, model #85-4217, with new tooling, extra details, and a host of optional parts. Revel has done an outstanding job recreating the ’68 Dodge Dart in 1/25^th scale. Marketed for model builders with a Skill level 3 building ability, this newly tooled 2’N1 special edition kit consists of 163 injection-molded white plastic pieces and chrome plated parts. The parts are crisply molded and some thought definitely went into the sprue placement in relation to the part. Because of this new tooling, parts require little to no clean up. The kit instructions are well done, nicely illustrated and easy to follow. A very colorful set of water slide decals is included that provides racing decals for the 426 Hemi or the stock 440 Magnum. A huge bonus is the decals for the dashboard and gauges as well as decals for detailing hard to paint items like the fire extinguisher label, among others. Clear parts are provided for the windows and headlights in addition to red colored clear parts for the taillights. Finally, two sets of tires and rims are provided as well as a host of other optional parts enabling the builder to build either version of the Dart. Happy Modeling – Pat

Covered in this Review: If you want to perfect your build; basic construction; preparing parts for better finishing; seam and gap identification and repair; adhesive selection and application; an altered construction sequence; advanced engine detailing with scratch built and aftermarket parts; interior detailing; making realistic gauges and dash panels; version considerations and alterations; removing version emblems; modifying the wheel wells for drag slicks; foiling the chrome trim; using decal setting solutions for fit; realistic tire prep; alternate suspension assembly for fit; using black washes for a realistic grill and taillights; and waxing the finish are all fully examined in this 13 page, full-color Step-by-Step review.

Important! – You MUST click on the “Return to Right on Replicas, LLC” link after you’ve made your purchase to download your review!

                                                              

To get your copy of the full review – just select one of the payment methods above for $2.99 USD.

Right On Replicas, LLC ©2011 All rights reserved.
*All registered trademarks are the property of their respective brands.

RoR Review 20110627* – Shenzhou 5 Spacecraft #01615 Scale 1:72 Review
中国阅读下文

Buy This Kit  购买此套装

See the Step-by-Step Review by Doug Cole   

When the nation of China sent their first man into space back in 2005 the Chinese people had every reason to be proud. They had joined the elite pair of nations, USA and Russia, with the same technological ability to put a man into space and bring him back home. 

For the modeler – this review takes a look at the lone offering for the Shenzhou 5 spacecraft from Trumpeter in 1:72 scale. This kit appears to have been copied from yet another model of the spacecraft that was released by the Chinese around the time of the launch and may have some discrepancies from the real launch vehicle. Despite the kits relatively low part count of 83 pieces, there are some tricky construction techniques required and some design choices that make this a skill level 2+ model kit. Methods and advice are included in the full review that will guide the builder through some of those difficulties.

A laboratory photo of the Shenzhou spacecraft was used to determine the color scheme for this build. Because of the secrecy involved at the time of the launch this may not be exactly correct. The box art reflects a model of the prototype that was “enhanced” to show the various sections of the spacecraft. I think that the color scheme in that depiction was incorrect. Perhaps some of our Chinese modelers can shed some light on that issue.

*All Registered trademarks are the property of their respective brands.

 

RoR的评论20110510 – 神舟五号飞船＃01615秤1:72评论

见由Doug科尔步骤分步审查

当中国民族送入太空早在2005年他们的第一人，中国人民有理由感到自豪。他们联同该集团将扩大与美国和俄罗斯列入同样的技术能力的各国精英对。

对于建模 – 这个审查需要在为神舟5号飞船从小号手在1:72规模独行提供的样子。该套件似乎已经从另一个认为发布由中国各地的发射时间，并可能从现实运载火箭一些出入飞船模型复制。尽管包相对较低的部分计83件，有一些棘手的施工技术要求和一些设计选择，使之成为一个技术水平2+模型套件。方法和建议都包括在全面审查，将引导这些困难一些建设者。

神舟飞船的实验室照片是用来确定颜色方案的此版本。由于在发射时所涉及的秘密，这可能不完全正确的。盒子艺术反映了认为是“加强”，以示对飞船的各个部分样机模型。我认为在这个描述是不正确的配色方案。也许我们中国的建模可以揭示一些关于这个问题的一些情况。

RoR Review 20110624 – 1977 Monte Carlo™ Revell #85-1962 Review

Buy This Kit

See the Step-by-Step Review by Stephen Wilder 

Revell’s® SnapTite™ line has long been the standard in entry-level kits.  While many may write these off as nothing but simple models for the beginner, with a little effort, they can be turned into respectable shelf-sitters, providing a good amount of enjoyment along the way.

This 1:25 scale release of the 1977 Monte Carlo™ is molded in red with white interior parts.  Chrome sprues provide the front grille and bumper, the rear bumper, and stock wheels.  A single clear part covers the windshield, rear glass, and rear quarter windows, while another clear sprue contains headlights.  A clear red sprue is included for the brake lights, while an assembled chassis (molded in black), rubber tires, and metal axles and screws round out the contents of the kit.  One sheet of self-adhesive stickers containing the flame graphics shown on the box art as well as a couple of license plates is also included.

For the modeler – This kit provides a nice break from super-detailed builds and high parts counts. Attention to detail and full instructions are provided in this review for body paint, vinyl top and interior finish, grill and cowl blackout, chassis painting and taillight enhancements. It took about 10 hours to assemble this kit, most of that time devoted to painting and foiling.  If built out of the box, the kit’s 34 parts would make a nice evening’s work for a preteen or parent-and-child team.